English translation for "tension member"
|
- 抗拉构材 ，受拉杆件
抗拉构件
抗牵构件
拉力构件
受抗拉件
受拉杆件, 受拉构件
受拉杆件[构件
受拉牵条
Related Translations:
- Example Sentences:
| 1. | A tension member may fail by plastic yielding .
拉伸元件可能由于塑性屈伏而破坏。 | | 2. | Conti synchroforce heavy - duty timing belts are available in the tooth profiles htd and std and are manufactured in two versions , i . e . as cxpiii with a glass cord tension member for high dynamic demands , and as cxa iii with an aramid tension member for high torques
Contisynchroforce高性能同步带按齿形有htd和std 。由玻璃线绳作张力层的cxp111运用于高功率传动，而由芳轮线构成张力层的cxa111运用于高扭矩传动。 | | 3. | Since the plate is wider and molding manner is agility , the cold - formed steel is a kind of high effect and economical material . but it is easily inflection when the pressure is bigger and it is adapted to being used tension members . the concrete is lower in price and has the good compression performance
冷弯薄壁型钢截面开展，成型方式灵活，是一种高效经济型材，但当承受压力过大时容易发生屈曲，适合用作受拉构件；混凝土价格便宜，受压性能好。 | | 4. | A way to avoiding crack or reducing crack width of concrete or reducing distortion of member is using prestressed concrete . the writer tried to make full use of the merit of the prestressed concrete and designed prestressed concrete mandril to control crack of structure . the prestressed concrete mandril , which was firstly applied high pressure on a small concrete bar , and then was made in concrete , so it would act as reinforced bar and resist load . in this thesis the writer designed 24 mmnbers and had experimental study of them , reached the conclusion that the effect of resisting crack of the prestressed concrete mandril was good when the load was not large , it can enhance the capacity of resisting crack and reduce the crack distance and crack width , but when the loads was large , the effect of resisting crack was not good , when we used the prestressed concrete mandril and reinforced bar together in member , the effect of resisting crack was very good . the writer analysed the adherence mechanism and wreck mechanism of the prestressed concrete mandril in anxial tension members , and according to the character of the prestressed concrete mandril , the writer constructed the bond model of it . then the writer introduced the analysis theory of crack including the bond - slip theory , the non - slip theory , the synthesis theory and mathematics stat method . the different theory had different theory base , they considered that the primary affection of crack width was different . in this test , the crack distance and crack width of members which placed reinforced bar were match to the compute value of the code gb 50010 - 2002 very well . to the members which
本文共进行了24根试件的试验研究,得出了预应力混凝土芯棒能较大地提高构件抗裂承载力,在荷载小于预应力混凝土芯棒的开裂荷载时有较好的抗裂效果,能较大地减小裂缝间距和裂缝宽度,但是当荷载较大预应力混凝土芯棒开裂时预应力混凝土芯棒的抗裂效果不是很好,若将普通钢筋和预应力混凝土芯棒一起使用时则有很好的抗裂效果。本文分析了预应力混凝土芯棒在轴拉试件中的粘结机理和破坏机理,根据预应力混凝土芯棒本身的特点,提出了预应力混凝土芯棒与后浇混凝土之间的粘结模型。然后本文详细介绍了经典的裂缝分析理论粘结滑移理论、无滑移理论、综合理论和数理统计方法,各理论有着各自不同的理论基础,认为影响裂缝宽度的主要影响因素也各不相同。 | | 5. | The results of full - scale tests in this dissertation canaugment international database of test and numerical analysis results for tubularjoints . based on the experimental study and numerical analysis , design proposal for theultimate tensile strength of gusset plate connections to slotted tubes is recommended . it has bigness significance to establish design formulae of gusset plate connections toslotted tubes and perfect design formulae of steel tension member and it also can givesome advices to practice engineering
在试验研究的基础上,根据有限元分析的结果,本文提出了关于管板节点受拉极限承载力的设计公式,为我国钢结构规范建立管板节点受拉极限承载力设计公式及有关拉杆的设计公式的进一步完善提供了有意义的参考,同时对实际工程也有一定的参考价值。 |
- Similar Words：
- "tension loading" English translation, "tension machine" English translation, "tension magnet" English translation, "tension management" English translation, "tension measuring device" English translation, "tension members" English translation, "tension meter" English translation, "tension modulus" English translation, "tension n" English translation, "tension of abdominal wall" English translation
|
|
|
